4-Port 10/100TX PoE + 1-Port Coax Long Reach PoE Ethernet over
Coaxial Extender
Description
Miray®Ethernet & PoE over Coax/TP/Cat-5 cable Extender transmit
10/100 Base-T Full Duplex Ethernet up to 1,000m over coaxial cable.
56V DC is distributed over the coax to all connected equipment.
Powers PoE, PoE+, or High Power PoE cameras (or other PoE devices),
up to30 watts. One EoC transceiver at the network-end can support
multiple remote transceivers /IP cameras by using analog BNC
splitter.
Product adopts industrial design,suitable for all kinds of video
transmission systems,such as security monitoring system,elevator
video network coverage,multimedia network teaching
system,industrial automation control system,medical monitoring
display system,advertising screen real-time playback system,etc.
Easy configuration, no PC required.
Features
◆ Analog monitoring surveillance and HD network upgrading without
replacing the coaxial cable
◆ Long distance network extended and can be up to 200 meters
◆ Support multi-point access, one point to multi-point access
◆ Plug and play, no need to set Long distance centralized power supply, the effect is equivalent to
PoE power supply
◆Transmission via coaxial cable, twisted pair, telephone line and
other transmission media
◆There must be two or more transmissions, the same link(within the
same physical coaxial or twisted pair) just set up the master
device to support multiple devices work simultaneously.
General Specifications
| No. | Name | Introduction |
| 1 | BNC Port | Coaxial input/outputBNC port |
| 2 | Coaxial LED light | Physical link connection indicator for the coaxial cable, twisted
pair link connectivity when the indicator is on the line, please check if the light is off the
transmissionline. |
| 3 | LAN LED light | LAN: Ethernet Link / Activity LED: When an Ethernet connection has
been established, the indicator light; Ethernet connection when there is data activity,
the indicator flashes. |
| 4 | Power supply input | DC 12V 2A, positive outside and negative inside |
| 5 | RJ45 interface | Connect to the LAN |
| 6 | Master/Slave switch | Only Slave |
| No. | Name | Introduction |
| 1 | BNC Port | Coaxial input/outputBNC port |
| 2 | Coaxial LED light | Physical link connection indicator for the coaxial cable, twisted
pair link connectivity when the indicator is on the line, please check if the light is off the
transmissionline. |
| 3 | LAN LED light | LAN: Ethernet Link / Activity LED: When an Ethernet connection has
been established, the indicator light; Ethernet connection when there is data activity, the
indicator flashes. |
| 4 | Power supply input | DC 48V-56V 1A, positive outside and negative inside |
| 5 | RJ45 interface | Connect to the LAN |
| 6 | Master/Slave switch | Only Slave |
| 7 | PoE | Standards | IEEE 802.3 at / af Both supports |
| Maximum Power | Up to 60W |
Ordering Information
| Part No. | Description |
| MR-1B1R-T/R | 10/100Mbps EOC Extender for IP Camera, 1 BNC port + 1 RJ45 port,
distance to 1.5KM |
| MR-2B1R-T/R | 10/100Mbps EOC Extender for IP Camera, 2 BNC port + 1 RJ45 port,
distance to 1.5KM |
| MR-4B1R-T/R | 10/100Mbps EOC Extender for IP Camera, 4 BNC port + 1 RJ45 port,
distance to 1.5KM |
| MR-1B4R-T/R | 10/100Mbps EOC Extender for IP Camera, 1 BNC port + 4 RJ45 port,
distance to 1.5KM |
| MR-1B1RP-T/R | 10/100Mbps POE EOC Extender for IP Camera, 1 BNC port + 1 RJ45
port, distance to 0.6KM |
| MR-1T1R-T/R | 10/100Mbps Ethernet over Twisted Pair Extender for IP Camera, 1
Twisted Pair port + 1 RJ45 port, distance to 1.5KM |
| MR-1T1RP-T/R | 10/100Mbps POE Ethernet over Twisted Pair Extender for IP Camera, 1
Twisted Pair port + 1 RJ45 port, distance to 0.6KM |
Product Panel
Product Details
Product Connection
For more details, welcome to inquire us freely.
